Merry Christmas

We just want to wish you all a very Merry Christmas.  This Nativity Scene was created by the ladies at the Samunnat Project in Nepal which we purchased from them a few years ago.  It is one of the favorite Christmas decorations we like to put out each year.  I love all the little details they put into each piece.

Nativity Scene created by the Samunnat Project in Nepal

We will continue our support for the project for another year.  One of the ways is providing any buffing pads needed for their Dremel tools as well as donating a portion of our buffing pad sales.  So with every purchase you make, you are helping out as well and until the end of the year we are making a larger donation from each pack that is sold.

Merry Christmas

and a prosperous 2017!

Q-Tip of the Day

We love adding crystal rhinestones to some of our work to give it some sparkle or bling.  We only use the genuine Swarovski crystals from Austria as they are the best quality with perfect cuts and sparkle.  

I recently came across a simple tool for picking up and positioning these crystals that works like a charm and is in the form of a pencil.

Use a regular pencil sharpener to give it a point.

Then pick the rhinestone crystal up by applying just a little bit of pressure to the center.

It will stay on the tool while you position it on the clay design.  

If your clay is really soft, you can even use the pencil to gently push the rhinestone in to set it.  We use Kato clay, however, which is much firmer so we use an empty tip from a pen as a tool to set them in.

I was working with some smaller 4mm size rhinestones the other day and the pen blank was just a little too large so I was looking around the studio for something that was smaller and a better fit.   I then noticed our little jar of Q-tips on the table and there it was!

The Q-tips are handy for so many things and I like to cut them in half and store them this way.

I remembered that some of the plastic type Q-tips are hollow inside and the ones we had were that type.  When I tested one out on the smaller rhinestones, I discovered they were a perfect fit!

If you are looking for some genuine Swarovski crystals to use with your clay, we purchase large amounts in bulk and have them for sale in our online store.  We even found these cute little containers for storing and keeping them handy and with the purchase of a variety mix or minimum 5 packages in colors of your choice, you will receive a Rhinestone Pick-up Pencil as a bonus gift.

Extruder Adapter Set-up and a Clay Marking Tool

We purchased the Driver Adapter from Cynthia Tinapple some time ago.  It is a tool that connects a polymer clay extruder to your power drill making it much easier for extruding your clay.  We still hadn't used it yet until we finally reorganized the studio.  We have been using the extruder tool more these days so I wanted it in a spot where it would be handy.

This is how the set-up now looks on our clay desk work area.

The vice is a screw down type and we didn't want to drill holes in our table so we attached it to a wood cutting board.  The cutting board is then clamped down onto the desk so it can be moved to another location if needed.

The drill we are using is cordless so can be a little heavy when the battery is attached.  I happened to have a box that was the perfect height to sit the drill on so we don't have to hold it while extruding the clay.  To use the adapter, we fill the extruder with clay and attach both ends.  We then insert the adapter end into the drill and then place the extruder into the vice so it is lined up and even.  There is a piece of parchment paper in front for the extruded clay to fall onto.

This set-up works really well and makes extruding the clay so much easier.  The clay we are extruding in the above photo is for our toglet buttons so they are consistent in thickness.  We are using a washer we found in just the right size to use as our die.  To make them all the same length I came up with my own marking tool.  I cut a strip of plastic canvas and cut out sections to create notches for marking.  On the opposite side, I cut out notches at a different length.  This tool works great when making beads as well.